Mixing the A and B liquids produces the foam.
Left
Foam Spray Gun
The mixture of liquids A and B is sprayed into a vinyl bag.
Foam Spray Gun
The foam begins to form a few seconds after the mixture is sprayed into the bag and then
gradually begins to harden. More can be added if the first injection of foam is not sufficient.
Place the bottom of the machine on top of the bag so the foam molds itself to the shape of
the machine.
J007/J010/J011
CÓPIA NÃO CONTROLADA
Right
Vinyl Bag
64
CÓPIA NÃO CONTROLADA
Repair Center Manual