3.
Input the SMTP Server Name (see photo).
NOTE: It is possible to use an IP address as the server name.
4.
Do any other settings on the customer's server that are necessary to send email from
the NIB.
5.
In the screen below, make sure the "Counter Notification" setting is ON.
NOTE: In this screen, you can also set the timing for e-mail reception (example: every
100 prints).
5
5
SM
CÓPIA NÃO CONTROLADA
3
3
5
5
1-25
CÓPIA NÃO CONTROLADA
B-Finder Setup Procedure
J007/J010/J011