Ricoh J001 Service Manual page 239

Event Service Center Call Response
Print surface
(9) Do the print job with settings that
dirty (cont.) match the size/type of paper.
(10) Repair
OHP
NRCratched
Backs of paper Feed several blank sheets.
stained If this does not correct the problem,
clean the transport belt.
Ink leaking Use a dry or damp cloth to wipe up ink
splatter. If the ink cannot be removed,
repair.
8.4.4 HARDWARE PROBLEMS
Event Service Center Call Response
Tray 1 (std. (1) Check for jammed paper, then
cassette) pops reset the cassette.
out after it is
pushed into the
printer.
(2) Check for jammed paper; repair if
this does not solve the problem.
SM
CÓPIA NÃO CONTROLADA
Probable Cause
Setting in the software application. Do simplex printing
Do the paper settings for the paper
loaded in the printer
Ink suction vent (left) is dirty.
Caps, wiper, ink suction vent of
the maintenance unit are dirty.
If more than 1 sheet is set, the Set OHP 1 sheet at a time.
pressure of separation may
scratch the 2nd sheet.
Ink has stained the transport belt. Feed several blank sheets.
Execute "Full" cleaning.
Printer is not level. Clean the transport belt, execute "Full"
Full tank detection abnormal print head cleaning.
Suction abnormal
Probable Cause
After opening the cassette check Check for jammed paper, then close
for paper remaining in the printer, the cassette.
such paper could prevent the
cassette from being closed.
Paper cassette pawls damaged. Replace the cassette.
CÓPIA NÃO CONTROLADA
Operator Action
Do the print job with paper settings that match
the paper loaded in the printer.
Clean the left ink suction vent.
Clean the left ink suction vent and maintenance
unit.
Set OHP 1 sheet at a time.
Feed several blank sheets. Clean the transport
belt.
Execute "Full" cleaning.
Clean the left ink suction vent.
Clean the maintenance unit.
Replace the maintenance unit.
Replace the carriage.
Clean the transport belt, execute "Full" print head
cleaning.
Clean the maintenance unit.
Replace the maintenance unit.
Replace the carriage.
Operator Action
Close the cassette again and check for jammed
paper.
Replace the cassette.
8-39
Problem Solution
Content User ST NR
X
X
X
X
X
X X
X X
X
X
X
X X
X
X
Problem Solution
Content User ST
X
X
J001/J003
C
X
X
X
X
X
X
X
X
X
X
NR
C