Ricoh J001 Service Manual page 458

Print head 1.
Print head 2.
Print head 3.
Print head 4.
Initial Fill Counter Reset
1. Turn the printer off.
2. After executing this menu, turn the printer on to start initial filling of the print
head tanks.
3. After executing this menu, the carriage adjustment mode can be executed.
CARRIAGE
5102
ADJUST
Use this SP to adjust the print head gap after print head replacement and print
the Nozzle Check pattern.
Carriage Adjustment Mode Flow
Before executing this menu, you must execute the carriage replacement mode.
1. Print the print head gap adjustment chart (High Speed).
2. Adjust the gap (High Speed).
3. Print the print head gap adjustment chart (High Speed).
4. Print the print head gap adjustment chart (Std. (Speed Priority). Std. (Quality
Priority)).
5. Adjust the gap (Std. (Quality Priority, Std. (Speed Priority)).
6. Print the print head gap adjustment chart (Std. (Speed Priority). Std. (Quality
Priority)).
7. Print the print head gap adjustment chart (High Quality).
8. Adjust the gap (High Quality).
9. Print the print head gap adjustment chart (High Quality).
10. Print the Nozzle Check test pattern.
5200 PRINT SMC
Use this SP to print an engine maintenance summary. You need at least 8 sheets
of paper to do this print. It will take at least 3 minutes before the print will start.
5300 DUMMY NUMBER
Use this SP to set the dummy number. Operation Panel Flow
Input Check: Sensors 1/2
5400 INPUT CHK1
Use this SP to display the on/off status of each sensor. The status of each sensor
(O, X) is displayed on the 2nd line of the display.
No. Meaning
1 Ink Cartridge Set Switches
SM
CÓPIA NÃO CONTROLADA
Set Printer n Carriage Adjust Mode
Print an Engine Maintenance Summary
Set a Dummy Number
Check Input Sensors (1)
No.
9 PFU Set Sensor
5-23
CÓPIA NÃO CONTROLADA
SP Tables
Meaning
J007/J010/J011