Ricoh J001 Service Manual page 392

Printer Display Summary
Message
Printing...
Ready
Remove Misfeed
Bypass
Remove Misfeed
Duplex
Remove Misfeed
Output
Remove Misfeed
Top Cover
Remove Misfeed
Tray 1
Reset Duplex Unit
correctly
Reset the cartridge
Resetting job...
Right Front Cover is
open
Close Right Front
Cover
Setting change...
Temp. alert
Please wait...
Waiting...
J007/J010/J011
CÓPIA NÃO CONTROLADA
Type
Status A print job is printing.
Status The printer is ready and able to print.
Error Paper has jammed feeding from the bypass tray
Remove the jammed paper.
Note: This is the result of a registration sensor late
error or registration sensor lag error.
Error Paper has jammed in the duplex unit. Open the duplex
unit and remove the jammed paper.
Note: This is the result of 1) Trailing edge sensor lag
error during either simplex or 2) Duplex printing,
registration sensor late error during duplex printing.
Error Paper has jammed at the output tray. Remove the
jammed paper.
Error Paper has jammed under the top cover. Open the top
cover and remove the jammed paper.
Error Paper has jammed feeding from Tray 1 (registration
sensor late error). Remove the jammed paper.
Error The duplex unit is not installed correctly. Remove it and
install it again.
Error No ink cartridge is installed, or the ink cartridge is not
installed properly.
Status The printer is re-initializing a print job. Please wait.
Error The right front cover is open. Close it.
Status The printer is changing its settings. Please wait.
Error The printer is overheated. Wait for the printer to cool.
When you see "Ready" on the operation panel, the
printer is ready to resume operation.
Status The printer is busy. Please wait.
4-6
CÓPIA NÃO CONTROLADA
What It Means
SM