Ricoh J001 Service Manual page 235

8.4.2 POOR PAPER FEED OUTPUT
Event Service Center Call Response
Double-feed (1) Check the type of paper in use.
Back of paper.
Plain paper different from known
brand.
Cases other than above.
(2) Check the paper loading method.
Fine, continuous form feed
Different types of paper mixed
Paper does not (1) Reset the end fence.
feed
(2) Check the paper in use.
Postcard/manual duplexing?
(3) Determine if the last sheet on the
bottom plate of the paper cassette
failed to feed.
(4) Make sure the end fence can be
locked.
(5) Clean, repair.
If Tray 2 is installed.
(1) Determine if the last sheet on the
bottom plate of the paper cassette
failed to feed.
SM
CÓPIA NÃO CONTROLADA
Probable Cause
Poor separation due to curls or Switched to a recommended paper.
wrinkles.
Different paper mixed with other Always use the same type of paper.
paper.
Paper stored under poor Always fan paper to remove static
conditions. before loading.
Continuous form feed Do not use continuous form feed paper;
if you use such paper separate each
sheet before loading.
Always use the same type of paper.
Mixing different types of paper can
cause resistance due to friction
from the back of the sheet below.
End fence is pushing against the Reset the end fence.
bottom of the stack.
Paper problem. Use recommended paper.
One-sided printed produces great Remove the curl.
amount of curl.
When loading paper, make sure Remove the paper from the cassette
that the bottom sheet is not and reload it.
caught on the bottom plate of the
paper cassette.
End fence is damaged. Replace the end fence.
Paper dust adhering to the paper
feed rollers.
Bottom plate pressure spring is
weak.
Feed clutch is not operating
correctly due to malfunction in the
DC relay board or the control
board.
When loading paper, make sure Remove the paper from the cassette
that the bottom sheet is not and reload it.
caught on the bottom plate of the
paper cassette.
CÓPIA NÃO CONTROLADA
Operator Action
Recommended types of paper.
Recommended types of paper.
Recommended types of paper.
Recommended types of paper.
Recommended types of paper.
Reset the end fence.
Check the paper in use, and recommend paper
approved for use with the printer.
Remove the curl.
Remove the paper from the cassette and reload
it.
Replace the end fence.
Clean the paper feed rollers.
Replace the pressure spring.
Replace the DC relay board, control board.
Remove the paper from the cassette and reload
it.
8-35
Problem Solution
Content User ST NR
X
X
X
X
X
X
X
X
X
X
X
X
X
J001/J003
C
X