Ricoh J001 Service Manual page 561

1. Use the printer driver to adjust the Print Quality Setting.
2. In the printer driver: Printer Configuration> Adjust Color Density> Obtain Printer
Optimize Value
3. Change the Print Quality setting.
B. Does the blurring occur in only text or in images as well?
The amount of paper feed may be out of adjustment.
Instructions: RPCS Printer Driver
If you are using the RPCS printer driver, use the printer driver to adjust the amount of paper
feed.
Instructions: PCL Printer Driver
If you are using the PCL priner driver, adjust the amount of paper feed on the operation
panel.
1. Push [Menu], select "Maintenance", then push [#Enter].
2. Select "Adj. Paper Feed" and push [#Enter].
3. Select "Pr. Test Print" and push [#Enter]. The test pattern prints.
4. Examine the test print. Note the number of the best pattern. The best pattern is
the pattern where the horizontal lines should be perfectly flat.
5. Select "Adjustment" and push [#Enter].
6. Enter the number of the pattern you selected in Step 4 and push [#Enter]. This
completes the adjustment.
7. Push [Online] to leave the menu mode.
Text offset
Does the text or ruled vertical and horizontal lines show signs of offset?
If you see text characters with faint color outlines where the letters should be one solid color,
this is evidence of text offset. If vertical or horizontal lines appear broken, this is also a sign
J007/J010/J011
CÓPIA NÃO CONTROLADA
12
CÓPIA NÃO CONTROLADA
Call Center Manual