Removing the Covers
5.
Remove the screw [C] ( x1)
6.
Use a small screwdriver to depress the pawl [D] to release the left side of the
cover.
7.
Lift up the ink cartridge compartment cover [E].
The operation panel is connected by a fragile FFC (flat film connector).
Do not disassemble the operation panel unless you are replacing it
8.
Turn over the cover and remove the screw [F].
The operation panel of the J011 is fastened with two screws. Remove both
screws.
J007/J010/J011
CÓPIA NÃO CONTROLADA
3-12
CÓPIA NÃO CONTROLADA
SM