Error And Status Messages Appear On Smart Organizing Monitor - Ricoh 132 MF User Manual

10. Troubleshooting
Error and Status Messages Appear on Smart
Organizing Monitor
Message
No Response from
I/O Device
Check the cable,
power cord, and
main switch.
Tray Not Detected or
No Paper
The indicated paper
source tray is not set
properly, or no
paper loaded.
Check the indicated
tray.
Tray 1 Jam
Bypass Tray Jam
Duplex Jam
Inner Jam
Outer Jam
Total Jam
Paper Size Mismatch
Paper of the selected
paper size is not
loaded in the
indicated paper
source tray.
Check the indicated
tray.
334
Causes
• The power cable of the
machine is not plugged in.
• The power of the machine
is not turned ON.
• The USB cable is not
connected.
• Tray 1 has run out of
paper.
• The bypass tray has run out
of paper.
A paper jam has occurred in the
machine.
The paper size specified on the
machine and the size specified
in the printer driver do not
match.
Solutions
• Check the printer power cord.
• Check the printer power switch is on.
• Check the USB cable is properly
connected.
• Load paper into Tray 1. See page 44
"Loading Paper".
• Load paper into the bypass tray. See
page 44 "Loading Paper".
Remove the jammed paper. See
page 336 "Removing Paper Jams" and
page 349 "Paper Feed Problems".
For details about specifying the paper size
setting on the machine, see page 43
"Paper Specifications and Adding Paper".
For details about changing the paper size
setting in the printer driver, see the printer
driver Help.