Paper
IJ Postcards (Address
Side)
Glossy Paper
Transparencies (OHP)
4.6.3 TEMPERATURE/HUMIDITY TABLE
There is a Temperature/Mode Table for every value of Mj (Mj1 to Mj4) that is retrieved from
the Print Mode Table. The system takes Mj from the Print Mode Table and the readings of
the temperature/humidity sensor and then selects for reference the appropriate
Temperature/Humidity Table, matrix of values defined by stepped ranges temperature and
humidity---15 columns for temperature and 8 rows for humidity. The tables below are the
Temperature/Humidity Tables stored in NVRAM before the printer is shipped from the
factory.
J011
Print Drive Wave Form: Mj1
Table 3-1 Mj1 Temperature/Humidity Table
SM
CÓPIA NÃO CONTROLADA
Mjn (Print
Image Quality
Drive Wave)
High Speed (Draft)
Std. (Speed Priority)
Std. (Quality
Priority)
Std. (Speed Priority)
Std. (Quality
Priority)
Std. (Quality
Priority)
(t912)
4-35
CÓPIA NÃO CONTROLADA
Transport Belt Charge Adjustments
Comments
2
Duplex Mode
2
Default
2
2
Default
4
2
Default
J007/J010/J011