Table of Contents
Advertisement
Images too light
A. Is the printer operating with the optimum settings?
The optimum settings can be enabled with the printer driver.
Instructions
1.
Open the printer driver.
2.
Select "Printer Configuration"> "Adjust Color Density"> "Obtain Printer Optimize
Value".
B. Is the print density setting in the printer driver correct?
Instructions
1.
Open the printer driver.
2.
Check the Print Density setting.
C. Is the "Level Color" item in the printer driver selected?
1.
Open the printer driver.
2.
If "Color Level" is selected (marked with a checkmark), click this item to remove
the checkmark.
D. Is the correct type of paper being used for the job?
Instructions
1.
Only paper that is specifically recommended for the printer should be used.
2.
The types of paper recommended for the printer are listed at the end of the
operating instructions manual.
Colors incorrect
A. Are you using the correct print mode for the job?
The Paper Type, Print Quality, Level Color, and other settings should be selected
appropriately for the print job. For more details, refer to the Operating Instructions.
B. Have you done any color settings in the software application?
Some software applications have settings that attempt to control color.
C. Have you cleaned the print head nozzles?
Clogged print head nozzles can cause color problems.
Instructions
1.
Open the printer driver.
2.
Check the Paper Type, Print Quality, Level Color, and other settings. Confirm that
these settings are appropriate for the print job.
3.
Open the software application.
4.
If any color settings have been selected, switch these off.
5.
Use the printer driver to control color settings.
J007/J010/J011
CÓPIA NÃO CONTROLADA
16
CÓPIA NÃO CONTROLADA
Call Center Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
