Table of Contents
Advertisement
Nothing prints
Description: No ink is ejected from print head nozzles.
Probable Cause: Nozzles blocked, print head defective. Print drive wave pattern not output.
Location: Print head, control board
Service Center Procedure:
1.
Do a test print with another file.
2.
Check the USB connection.
3.
Do a Nozzle Check print and check the results.
4.
Do "Head-Cleaning" 3 times.
5.
Do "Head-Flushing" 1 time
Replacement Procedure:
1.
Do "Head-Cleaning" 3 times.
2.
Do "Head-Flushing" 1 time.
3.
Replace print head.
4.
Replace control board.
Ink ejects improperly
Description: Ink ejected at points off the chart, or ejected ink shows unused color.
Probable Cause: Print head defective
Location: Print head unit, or control board.
Service Center Procedure:
1.
Do a test print with another file.
2.
Check the USB connection.
3.
Change print mode and try again.
4.
Do a Nozzle Check print and check the results.
5.
Do "Head-Cleaning" 3 times.
6.
Do "Head-Flushing" 1 time.
Replacement Procedure:
1.
Do "Head-Cleaning" 3 times.
2.
Do "Head-Flushing" 1 time.
3.
Replace the print head.
4.
Replace the control board.
J007/J010/J011
CÓPIA NÃO CONTROLADA
38
CÓPIA NÃO CONTROLADA
Repair Center Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
