Ricoh J001 Service Manual page 102

PRINTER DISPLAY SUMMARY
Status
Paper Jam (Duplex Unit)
Paper Jam (Paper Exit)
Paper in Bypass Tray at
Start of Job
Temperature Out of
Range – Too Low
Engine Service Call
J001/J003
CÓPIA NÃO CONTROLADA
Message Display
Paper Misfeed.
Paper jam in the Duplex Unit.
Paper Misfeed.
Paper jam at the paper exit. Check the paper exit and remove
the jammed sheet.
Paper remains in Bypass Tray.
Paper remains in the Bypass Tray at the start of the print job.
Remove the paper from the Bypass Tray, and then press the
[Paper Feed] key on the printer.
Print head temperature not within range.
The temperature of the print head not within the operational
temperature range to allow printing. Turn the printer off, and
then turn it on again. If the printer has been moved to a warm
location from a cold location, allow the printer time to warm up
naturally to the room temperature before you use it.
Printer Engine Error.
Turn the printer off. Then turn it on again. If this does not solve
the problem, note the error (ERR***-*) displayed on the PC
monitor. ( 4.3.3)
4-6
CÓPIA NÃO CONTROLADA
Status Display
SM