Ricoh J001 Service Manual page 447

SP Tables
SP1154：ID4
[0 to 255/0/1/0.1 mm]
1149 CHG:W2:MID:9
1151 CHG:W2:MID:10
1153 CHG:W2:MID:11
1155 CHG:W1:MID:12
This SP is currently under development.
Use this SP to set the pitch width of the charge applied to the MID area of the
2nd side of paper in future print modes (currently under development) during
duplex printing. Do this SP when mist build-up in the MID area is clogging the
print head nozzles. This SP setting is linked to the charge pitch tables (SP1200
to SP1231). The IDs are determined by the temperature and humidity. There are
4 IDs associated with the SP numbers listed below:
SP1149：ID1
SP1151：ID2
SP1153：ID3
SP1155：ID4
[0 to 255/0/1/0.1 mm]
Charge Width Setting Mj4: Duplex
1156 CHG:W2:EDGE:13
1158 CHG:W2:EDGE:14
1160 CHG:W2:EDGE:15
1162 CHG:W1:EDGE:16
Use this SP to set the pitch width of the charge applied to the LE/TE on the 2nd
side of glossy paper for duplex printing in the High Quality mode. Do this SP
when the mist build-up near the leading and trailing edges on the 2nd side of
glossy paper is causing the print heads to clog during duplex printing in High
Quality mode. This SP setting is linked to the charge pitch tables (SP1200 to
SP1231). The IDs are determined by the temperature and humidity. There are 4
IDs associated with the SP numbers listed below:
SP1156：ID1
SP1158：ID2
SP1160：ID3
SP1162：ID4
[0 to 255/0/1/0.1 mm]
1157 CHG:W2:EDGE:13
1159 CHG:W2:EDGE:14
1161 CHG:W2:EDGE:15
1163 CHG:W1:EDGE:16
J007/J010/J011
CÓPIA NÃO CONTROLADA
MID: Mj3:ID1
MID: Mj3:ID2
MID: Mj3:ID3
MID: Mj3:ID4
LE/TE: Mj4:ID1
LE/TE: Mj4:ID2
LE/TE: Mj4:ID3
LE/TE: Mj4:ID4
MID: Mj4:ID1
MID: Mj4:ID2
MID: Mj4:ID3
MID: Mj4:ID4
5-12
CÓPIA NÃO CONTROLADA
SM