Ricoh J001 Service Manual page 475

Bit Switches
Bit Function
Self-Diagnostics
Execute
1
2 Double-Count
3 Carriage Setting 2
Charge Setting
4
ICB Miscount
Recovery
5
USB Serial Signal
6
Hidden Functions
7
J007/J010/J011
CÓPIA NÃO CONTROLADA
Setting
Default
0 1
OFF ON 0
OFF ON 0
OFF ON 0
OFF ON 0
OFF ON 0
0 1 0
0 1 0
5-40
CÓPIA NÃO CONTROLADA
Rev. 09/2008
Details
before the ink tanks are filled.
OFF: Check is not done.
ON: Check is done
If an abnormal condition is
detected, this triggers SC986
and the printer will not operate
(the tanks are not filled).
This switch sets whether the
self-diagnostic test executes
automatically if the humidity
sensor connection is broken.
OFF: No self-diagnostics
ON: Self-diagnostics execute
Not used for J007/J010, J011
Not used for J007/J010, J011
Shows the flag to indicate
updated version allows charge
adjustment on the transport
belt:
0: Default
1: NVRAM update succeeded,
charge can be adjusted.
Japan Only
Determines whether ink
collection tank count in
NVRAM is corrected or not.
0: Count not corrected
1: Count corrected.
Determines how the USB
signal is fixed.
0: Serial signal is set with the
value in NVRAM.
1: USB serial signal fixed at
"0" (value in NVRAM is not
changed).
Determines whether hidden
functions (hidden paper sizes
A5 SEF, B6 SEF) are
displayed.
0: No A5 SEF, B6 SEF display
1: A5 SEF, B6 SEF displayed
SM