Ricoh J001 Service Manual page 372

3. Remove timing belt [1].
4. Remove motor screws [2], [3] (
5. Remove motor plate screws [4], [5], [6] (
6. Pull out the vertical motor (
Reassembly
1. Connect the motor and insert it.
2. Make sure the motor is perfectly horizontal.
3. Position the plate and reattach screws [1], [2], [3] ( x3).
4. Attach the motor screws [4], [5] to fasten the motor to the plate ( x2).
SM
CÓPIA NÃO CONTROLADA
x2)
x3).
x1).
3-25
CÓPIA NÃO CONTROLADA
Component Removal
J007/J010/J011