Ipv6 Configuration Tab - Ricoh SP 220SNw User Manual

Item
Gateway

IPv6 Configuration Tab

IPv6
Item
IPv6
IPv6 Address
Item
DHCP
IP Address (DHCP)
Stateless Address
Gateway Address
Link-local Address
Manual Configuration
Address
Prefix Length
Gateway Address
Enter the IPv4 address of the network gateway.
Select whether to enable or disable IPv6. You cannot disable IPv6 using
Web Image Monitor if the machine is currently in use in an IPv6
environment. In this case, use the control panel to disable [IPv6] under
[Network Settings].
When disabled, [DHCP], [Manual Configuration Address], [Prefix Length],
and [Gateway Address] below cannot be configured.
Select whether or not the machine obtains its IPv6 address from a DHCP
server.
Displays the IPv6 address obtained from the DHCP server when [DHCP] is
set to [Active].
Displays up to four stateless auto addresses.
Displays the machine's default gateway address.
Displays the link local address of the machine. The link local address is an
address that is valid only inside the local network (local segment).
Enter the machine's IPv6 address. Can contain up to 39 characters.
Enter the prefix length, using a value between 0 and 128.
Enter the default gateway's IPv6 address. Can contain up to 39 characters.
Configuring the Network Settings
Description
Description
Description
215