Specifying Login Details - Ricoh 920F Operating Instructions Manual

3. Configuring User Authentication
15. Re-enter the login password, and then press the [OK] key.
16. Press the [Escape] key two times.
17. Press [End].
3
18. Press the [OK] key.
19. Press the [User Tools/Counter] key.

Specifying Login Details

The login user name and password specified in [Address Book Management] can be used as the login
information for "SMTP Authentication", "Folder Authentication" and "LDAP Authentication".
If you do not want to use the login user name and password specified in [Address Book Management] for
"SMTP Authentication", "Folder Authentication", or "LDAP Authentication", see "Address Book", Network
and System Settings Guide.
For details about specifying login user name and login password, see "Specifying Login User Names and
Passwords".
• When using [Use Auth. Info at Login] for "SMTP Authentication", "Folder Authentication" or "LDAP
Authentication", a user name other than "other", "admin", "supervisor" or "HIDE***" must be
specified. The symbol "***" represents any character.
• To use "Use Auth. Info at Login" for "SMTP Authentication", a login password up to 128 characters
in length must be specified.
1. Press the [User Tools/Counter] key.
56