Specifying Ldap Authentication - Ricoh 920F Operating Instructions Manual

You do not have to enter the user name if the LDAP server supports "Anonymous
Authentication".
• Password
You do not have to enter the password if the LDAP server supports "Anonymous
Authentication".
• When you select Cleartext authentication, LDAP Simplified authentication is enabled. Simplified
authentication can be performed with a user attribute (such as cn, or uid), instead of the DN.
• You can also prohibit blank passwords at login for simplified authentication. For details about LDAP
Simplified authentication, contact your sales representative.
• Under LDAP Authentication, if "Anonymous Authentication" in the LDAP server's settings is not set to
Prohibit, users who do not have an LDAP server account might still be able to gain access.
• If the LDAP server is configured using Windows Active Directory, "Anonymous Authentication" might
be available. If Windows authentication is available, we recommend you use it.
• The first time an unregistered user accesses the machine after LDAP authentication has been specified,
the user is registered in the machine and can use the functions available under "Available Functions"
during LDAP Authentication. To limit the available functions for each user, register each user and
corresponding "Available Functions" setting in the Address Book, or specify "Available Functions" for
each registered user. The "Available Functions" setting becomes effective when the user accesses the
machine subsequently.
• To enable Kerberos for LDAP authentication, a realm must be registered beforehand. The realm must
be programmed in capital letters. For details about registering a realm, see the "Programming the
LDAP Server", or "Programming the Realm", Network and System Settings Guide.
• The reference function is not available for SSL servers when a search for LDAP is in progress.

Specifying LDAP Authentication

Before beginning to configure the machine, make sure that administrator authentication is properly
configured under "Admin. Auth. Management".
This can be specified by the machine administrator.
For details about logging on and logging off with administrator authentication, see "Logging on Using
Administrator Authentication", "Logging off Using Administrator Authentication".
1. Press the [User Tools/Counter] key.
LDAP Authentication
3
71