Changing The User Parameters - Ricoh 9016 Operating Instructions Manual

Switch Bit Item
32 0 Select priority order for alternative
destinations if there is no destina-
tion of the specified type.
34 0 Use gatekeeper server with IP-Fax
34 1 Use gatekeeper with IP-Fax

Changing the User Parameters

This section describes how to set parameters.
Important
! Access to some User Parameter Setting may require options, or other settings
may need to be made beforehand.
! It is recommended that you print and store the "Parameter Settings List"
when you program or change parameter settings.
! Do not change any bit switches other than those shown on the previous pages.
A
Select [Fax Features] using {U} or {T}, and then press the {OK} key.
B
Select [Administrator Tools] using {U} or {T}, and then press the {OK} key.
C
Select [Parameter Setting] using {U} or {T}, and then press the {OK} key.
Parameter Setting
0 1
Paper Output Electronic Out-
Priority put Priority
<Priority Order> <Priority Order>
1. IP-Fax destina- 1. E-mail address
tion
2. Folder
2. Fax number
3. IP-Fax
3. E-mail address
4. Fax number
4. Folder
Off On
Off On
4
99