Changing The User Parameters - Ricoh C6055 Operating Instructions Manual

Switch: 34, Bit: 1
Use SIP server with IP-Fax
• 0: Off
• 1: On
Switch: 35, Bit: 7, 6, 5, 4, 3, 2, 1, 0
Redial interval when sending a backup file
• 00000000: 0 minute(s)
Switch: 36, Bit: 7, 6, 5, 4, 3, 2, 1, 0
Maximum number of redials when sending a backup file
• 00000000/00000001: 1 time(s)
Switch: 37, Bit: 0
Whether to stop sending a backup file if the destination folder becomes full while the machine is
sending or waiting to send a fax or the backup file
• 0: No
• 1: Yes
Switch: 37, Bit: 3, 2
Whether to print the backup file if it cannot be sent
• 00: Do not print
• 01: Print first page only
• 10: Print whole file

Changing the User Parameters

This section describes how to set parameters.
• Access to some User Parameter Settings may require options, or other settings may need to be made
beforehand.
• It is recommended that you print and keep a User Parameter list when you program or change a User
Parameter.
• Do not change any bit switches other than those shown on the previous pages.
1. Press [Facsimile Features].
2. Press [Initial Settings].
3. Press [Parameter Setting].
4. Select the switch number you want to change.
11111111: 255 minute(s)
11111110/11111111: 254 time(s)
Parameter Settings
4
193