Table of Contents
Advertisement
6. Scan
This chapter describes frequently used scanner functions and operations. For information not included in
this chapter, see Scan available on our website.
Basic Procedure When Using Scan to Folder
• Before performing this procedure, see "Preparation for Sending by Scan to Folder", Scan and
confirm the details of the destination computer. See also "Registering Folders", Connecting the
Machine/ System Settings, and register the address of the destination computer to the address
book.
1.
Press [Home] (
) at the bottom of the screen in the center.
2.
Flick the screen to the left, and then press the [Scanner] icon on Home screen 4.
3.
Make sure that no previous settings remain.
If a previous setting remains, press [Reset].
4.
Press the [Folder] tab.
5.
Place originals.
6.
If necessary, specify the scan settings according to the original to be scanned.
Example: Scanning the document in color/duplex mode, and saving as a PDF file.
• Press [Scan Settings], press [Full Color: Text / Photo] in the [Original Type] tab, and then
press [OK].
• Press [Original Feed Type], press [2 Sided Original], and then press [OK].
• Press [Send File Type / Name], press [PDF], and then press [OK].
For information about other settings, see the each section.
7.
Specify the destination.
You can specify multiple destinations.
105
Advertisement
Table of Contents
