Pairing With A Data Device - Icom IC-F5400DP Series Operating Manual

11
Bluetooth ® OPERATION

Pairing with a data device

This section describes how to pair with a Bluetooth
data device using the Portable Ten-key and the
Simple key types or Mobile LCD types�
NOTE: For the Portable Non-display type and
Mobile Segment type
To pairing with a data device, see page 11-4 for
details�
Step 1: Entering the Pairing mode
L See the data device's instruction manual for details�
Step 2: Turning ON the Bluetooth
L See page 11-3 for details�
Step 3: Searching for the data device (Transceiver)
1� Push [Menu] to display the "Menu" screen�
2� Push [Left] or [Right] to select "Bluetooth," then
push [OK]�
3� Push [Up] or [Down] to select "BT Device List,"
then push [OK]�
4� Push [Up] or [Down] to select "Find Device," then
push [OK]�
L If the transceiver has been connected to the
Bluetooth ® device before, its name may be
displayed�
®
(Data device)
function
®
(Transceiver)
11-9
5� Push [Up] or [Down] to select "Data Device," then
push [OK] to start searching�
6� When pairable devices are found, their names are
displayed on the screen�
TIP:Ifthetransceivercannotfi  ndanypairable
device, the following screen is displayed� In that
case, do step 4 to search for a headset again�
► Continued on the next page�