Pairing With A Data Device - Icom IC-F7010 Series Operating Manual

11
Bluetooth ® OPERATION

Pairing with a data device

Step 1: Entering the Pairing mode
 See the data device's instruction manual for details.
Step 2: Turning ON the Bluetooth function
 See page 11-3 for details.
Step 3: Searching for the data device (Transceiver)
1. Push [Menu] to display the "Menu" screen.
2. Push [Left] or [Right] to select "Bluetooth," then
push [OK].
3. Push [Up] or [Down] to select "BT Device List,"
then push [OK].
4. Push [Up] or [Down] to select "Find Device," then
push [OK].
 If the transceiver has been connected to the
Bluetooth device before, its name may be displayed.
(Data device) 5. Push [Up] or [Down] to select "Data Device," then
(Transceiver)
6. When pairable devices are found, their names are
TIP: If the transceiver cannot fi nd any pairable
device, the following screen is displayed. In that
case, do step 4 to search for a device again.
11-7
push [OK] to start searching.
displayed on the screen.
Continued on the next page.