IMPORTANT
READ
THIS
INSTRUCTION
MANUAL
CAREFULLY
before attempting to operate the
transceiver.
PRECAUTIONS
A NEVER
apply AC power to the [DC 13.8V]
socket. This could cause a fire or ruin the transceiver.
A NEVER apply more than 16 V DC to the [DC
13.8V] socket. This could cause a fire or ruin the
transceiver.
A NEVER allow children to touch the transceiver.
A NEVER let metal, wire or other objects touch
any internal parts or connectors on the rear panel of
the transceiver. This will cause an electric shock.
A NEVER expose the transceiver to rain, snow or
any liquids.
AVOID using or placing the transceiver in areas with
temperatures below —10 °C (+14°F) or above +60 °C
(+140°F).
FOREWORD
Thank you for purchasing the IC-707 HF TRANS-
CEIVER.
The IC-707 is a compact, easy-to-operate
transceiver
designed
with
Icom's
state-of-the-art
technology.
If you have any questions regarding the IC-707, feel
free to contact your nearest Icom Dealer or Service
Center.
UNPACKING
>
=
=
=
=
=m
=
=
pt
—
SAVE THIS INSTRUCTION MANUAL.
This
instruction
manual
contains
important
safety
and
operating instructions for the IC-707.
AVOID placing the transceiver against walls or putt-
ing anything on top of the transceiver.
This will
obstruct heat dissipation.
AVOID placing the transceiver in excessively dusty
environments or in direct sunlight.
AVOID transmitting without an antenna.
This will
damage the transceiver.
During mobile operation, DO NOT operate the trans-
ceiver without running the vehicle's engine.
The
vehicle's battery will quickly run out.
BE CAREFUL! The heatsink becomes hot when
operating the transceiver for long periods.
BE CAREFUL!
DO NOT apply undue force to the
function display. DO NOT push the function display.
EXPLICIT DEFINITIONS
a
a
A WARNING
If disregarded, inconvenience only. No
personal injury, risk of fire or electric
shock.
Accessories included with the IC-707:
@ DC power cable (OPC-025A) .........0000er0000
anana an anae anana 1
(2) Hand microphone (HM-36) ........cccsceccsescssssesesssssseseees 1
(3) Spare fuse (for DC power cable, FGB 20 A).............. 1
@ Spare fuse (for internal PA unit, FGB 4 A) ...........v...c. 1
©)4 X 12 mm self-tapping screws
(for Optional MB-23) ..........sseseesesseosereoeeeeoossossosssssosesesee 2
©3 X 6 mm self-tapping screws
(for Optional MB-23) .........cccsssesccceeescesesecerssseereseseseeees 4
Need help?
Do you have a question about the IC-707 and is the answer not in the manual?
Questions and answers