Set Mode Items; D Auto Power Off; D Power Save - Icom IC-92A Instruction Manual

11
MENU SCREEN OPERATION

■ Set mode items

D Auto power OFF

The transceiver can be set to automatically turn OFF after
a specifi ed time period with a beep when no key operations
are performed.
30 min., 60 min, 90 min, 120 min and OFF
specified. The specified time period is retained even when
the transceiver is turned OFF by the auto power OFF func-
tion. To cancel the function, select "OFF" in this item.
AUTO POWER OFF AUTO POWER OFF
r OFF
30MIN
60MIN
90MIN
120MIN

D Power save

The power save function reduces the current drain to con-
serve battery power. This power save function can be turned
OFF, if desired, by turning power ON and OFF.
In the default setting
tion is activated in a 1:1
no signal is received for 5 sec. The ratio becomes 1:4
(150 msec.: 600 msec.)
60 sec. Then the ratio becomes 1:8
when no signal is received for another more 60 sec.
96
(default)
AUTO POWER OFF AUTO POWER OFF
OFF OFF
r
30MIN 30MIN
60MIN 60MIN
90MIN 90MIN
120MIN 120MIN
, the power save func-
("AUTO" selection)
ratio when
(150 msec.: 150 msec.)
when no signal is received for another
(150 msec.: 1200 msec.)
POWER SAVE POWER SAVE
OFF
r AUTO
NOTE: Power save function is unable to function when
can be
using the external power supply (More than 10 V DC) or
setting Auto reply function to ON or VOICE (☞p. 100).
D Attenuator
The attenuator prevents distortion of a desired signal by very
strong RF signals near the desired frequency or when very
strong electric fields, such as from a broadcasting station,
are present at your location.
Select the attenuator function ON and OFF
ATTENUATOR ATTENUATOR
r
OFF
ON
POWER SAVE POWER SAVE
r OFF OFF
AUTO AUTO
.
(default)
ATTENUATOR ATTENUATOR
OFF OFF
r ON