7
SET MODE
Set mode items (Continued)
Automatic backlighting
❏
This function is convenient for the operation in low light. The
backlight can be turned ON or OFF.
• The backlight is automatically activated when you push any key
other than [PTT].
• The backlight is automatically turned OFF after 5 seconds of
inactivity.
Backlightng ON (default)
LCD contrast setting
❏
Set the LCD contrast level to High or Low.
High contrast (default)
The LCD contrast level has little effect during indoor use.
20
"A_bL"
Push
Backlighting OFF
"Lcdc"
Push
Low contrast
Power Save function
❏
The Power Save function reduces current drain by
periodically turning OFF the receiver circuit.
• OFF:
The function is turned OFF.
• ON:
When no signal is received, and no operation is
performed for 5 seconds, the receiver circuit is
periodically turned OFF.
Power Save ON
(default)
"P_SA"
Push
Power Save OFF