D Reflector Echo Testing; D Requesting Repeater Information - Icom ID-52E PLUS Basic Manual

D Reflector Echo Testing

To confirm that your signal is correctly getting into the repeater, you can transmit a short
message as a trial. After releasing [PTT], your message will be played back.
1. Push D-pad() to select "TO," and then push [ENT].
2. Select "Reflector."
3. Select "Echo Test."
• Returns to the DR screen, and "Echo Test" and "E" are displayed in "TO."
4. Hold down [PTT] and speak into the microphone.
• The TX/RX indicator lights red.
5. Release [PTT] to hear your message.

D Requesting repeater information

When you send the repeater information command, an ID message is sent back.
1. Push D-pad() to select "TO," and then push [ENT].
2. Select "Reflector."
3. Select "Repeater Information."
• Returns to the DR screen, and "Repeater Information" and "I" are displayed in "TO."
4. Hold down [PTT] to transmit the repeater information command.
• The TX/RX indicator lights red.
5. Release [PTT] to hear the repeater ID message.
D-STAR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
62