Figure 160: Configuring Remote Authentication Server (Radius); Configuring Local/Remote Logon Authentication - Edge-Core ECS4620-28T Quick Start Manual

◆
Sequence at Priority - Specifies the server and sequence to use for the group.
(Range: 1-5 for RADIUS; 1 for TACACS)
When specifying the priority sequence for a sever, the server index must
already be defined (see
page 279).
Web Interface
To configure the parameters for RADIUS or TACACS+ authentication:
1.
Click Security, AAA, Server.
2.
Select Configure Server from the Step list.
3.
Select RADIUS or TACACS+ server type.
4.
Select Global to specify the parameters that apply globally to all specified
servers, or select a specific Server Index to specify the parameters that apply to
a specific server.
5.
To set or modify the authentication key, mark the Set Key box, enter the key,
and then confirm it
6.
Click Apply.

Figure 160: Configuring Remote Authentication Server (RADIUS)

AAA (Authentication, Authorization and Accounting)
"Configuring Local/Remote Logon Authentication" on
– 283 –
Chapter 12
| Security Measures