Showing Port Statistics; Table 3-3 Port Statistics; Figure 3-4 Port Statistics - Edge-Core ES4308-PoE Management Manual

Showing Port Statistics

You can display statistics on network traffic from the ports. These statistics can be
used to identify potential problems with the switch (such as a faulty port or unusually
heavy loading). All values displayed have been accumulated since the last system
reboot, but can be reset to zero by clicking the CLEAR button. The current statistics
are refreshed every few seconds, but the refresh can be paused by clicking the
PAUSE button.
Parameter
Interface Statistics
Received Octets
Received Packets
Received Broadcast/Multicast
Packets
Received Errors
Transmitted Octets
Transmitted Packets
Transmitted Broadcast/Multicast
Packets
Transmitted Errors
Web – Click STATUS, Statistics.

Table 3-3 Port Statistics

Description
The total number of octets received on the interface, including framing
characters.
The number of subnetwork-unicast packets delivered to a higher-layer
protocol.
The number of packets, delivered by this sub-layer to a higher (sub-)layer,
which were addressed to a multicast address at this sub-layer.
The number of inbound packets that contained errors preventing them
from being deliverable to a higher-layer protocol.
The total number of octets transmitted out of the interface, including
framing characters.
The total number of packets that higher-level protocols requested be
transmitted to a subnetwork-unicast address, including those that were
discarded or not sent.
The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a multicast address at this
sub-layer, including those that were discarded or not sent.
The number of outbound packets that could not be transmitted because
of errors.

Figure 3-4 Port Statistics

Web Configuration
3-9