CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
3) Disconnect the connector [3], and detach
the inverter cooling fan [2].
10. Removing the Pre-Transfer
Charging Assembly Fan
1) Open the front door.
2) Remove the inside cover (process unit).
3) Remove the two screws [1], and discon-
nect the two connectors [2]; then, detach
the fan motor [3].
Caution:
When mounting the pre-transfer charg-
ing fan, be sure that the direction of air
current matches the marking indicated
on the fan.
9-42
COPYRIGHT © 1999 CANON INC.
[3]
Figure 9-C718
[1]
Figure 9-C719
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[2]
[3]