V. INSTALLING THE REMOTE DIAGNOSTIC DEVICE II
Keep the following in mind for the instal-
lation:
1. Observe all applicable regulations of the
country.
2. Check to make sure that the host copier
has been properly installed.
3. Disconnect the copier's power plug before
starting the work.
4. Identify the screws by type (length, diam-
eter) and location.
5. Prepare the computer at the service station
with the necessary settings.
1) Remove the two screws [2], and detach
the upper cover [1] of the controller.
COPYRIGHT © 1999 CANON INC.
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
[1]
[2]
Figure 11-501
[2]
11-27