Canon GP605 Service Manual page 562

CHAPTER 11 INSTALLATION
10) Select the paper size for control as fol-
lows:
10.1) As needed, change the paper size for
control using the DIP switch on the con-
troller and the Numeric Keypad-A1. To
use the existing size, go to step 11).
10.2) Use the v / key to scan through the paper
sizes. (Note that control paper size 5
'OTH' cannot be changed and, therefore,
is not indicated).
EX 1:
1. SIZE 1=A3 is indicated.
2. Press the key.
v
3. SIZE 2=A4 is indicated.
4. Press the v key.
5. SIZE 3=B4 is indicated.
6. Press the v key.
7. SIZE 4=B5 is indicated.
v
8. Press the key.
9. SIZE 3=B4 is indicated.
v
10. Press the key.
11. SIZE 2=A4 is indicated.
EX 2:
1. Press the / key to indicate v
v
SIZE 3=B4
2. Find the size of LGL form the conver-
sion code tables (Table 11-C604), and
press '1' and '3'.
3. SIZE 3=13 is indicated.
4. Press the ENT key.
5. SIZE 3=LGL is indicated.
Caution:
1. For SIZE 1 through 4, the same paper size code cannot be used more than once.
2. The counter readings will not be cleared by changing the size.
11-48
COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)