Canon GP605 Service Manual page 554

CHAPTER 11 INSTALLATION
3) Connect the 8P connector [8] of the con-
troller and the 8P connector [9] (J521) of
the copier's DC controller.
4) If the Card Reader-A1 is to be installed,
connect the relay cable (9P) for the card
reader connected to J4 of the controller to
the 9P connector (J520) of the copier's DC
control.
5) Secure the controller to the copier's rear
cover with four screws [10]. (Use the
screws that come with the unit.)
11-40
COPYRIGHT © 1999 CANON INC.
Figure 11-B603
[10]
[10]
Figure 11-B604
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[9]
[8]