Mounting The Photosensitive Drum Unit - Canon GP605 Service Manual

CHAPTER 6 IMAGE FORMATION SYSTEM
4) Pull out the flat heater (drum heater) [6]
from inside the drum cylinder.
Points to Note When Mounting
the Flange
There is hardly a gap between the flange
and the inner side of the drum, causing
the flange to get stuck if pushed at an
angle.
When mounting the flange, push it in a
parallel direction to the drum without
applying excessive force.
4. Mounting the Photosensitive
Drum Unit
Mount the photosensitive drum by revers-
ing the steps used to remove it with the follow-
ing in mind.
Caution:
Be sure to attach the bearing stopper as
soon as you have placed the photosensi-
tive drum on the process unit. (Other-
wise, the photosensitive drum may fall,
damaging its surface.)
6-54
COPYRIGHT © 1999 CANON INC.
Figure 6-A707
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[6]