Canon GP605 Service Manual page 582

CHAPTER 12 MAINTENANCE AND SERVICING
IV . SCHEDULED SERVICING ITEMS
Caution:
Do not use solvents/oils other than those shown herein.
A. Copier
: Clean : Replace
Unit
Externals/ Copyboard glass
controls
Ozone filter
(FM2, FM8)
Dust-proofing filter
(FM1, FM3, FM4;
FM10, FM14)
Scanner Scanner cable
Scanner rail
No. 1 through
Optical path
No. 3 mirrors
Dust-proofing glass
Reflecting plate
Standard white plate
Charging wire
Charging
assembly (primary, pre-
transfer,
transfer/separation)
Grid wire (primary)
Charging assembly
shield plate (each
assembly)
Roller electrode
12-8
COPYRIGHT © 1999 CANON INC.
: Oil : Adjust
Part
Instal- every
lation 250,000
Table 12-401-1
: Inspect
Intervals
every every
500,000 750,000
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
every
1,000,000
Remove the dust from
the surface of the filter.
See Figure 12-401.
Remove the dust from
the surface of the filter.
See Figure 12-401.
Check/adjust for the
first 250,000 copies.
Apply silicone oil
(FY9-6011).