Adjusting The Image Leading - Canon GP605 Service Manual

5

Adjusting the Image Leading

1) Correct the non-image width as specified in service mode (COPIER>ADJUST>ADJ-
XY>ADJ-X).
COPYRIGHT © 1999 CANON INC.
Decrease the setting of ADJ-X. (A decrease
of 12 decreases the non-image width by 1
mm.)
Increase the setting of ADJ-X. (An increase of
12 increases the non-image width by 1 mm.)
Figure 13-A214
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
Image leading edge
13-13