Unpacking - Canon GP605 Service Manual

A.

Unpacking

No.
1 Unpack the copier. Remove the two grip
covers (front, rear) on the left side, and
shift up the grips.
2 Take out the grip from inside the shipping
box.
3 Remove the grip cover (rear) from the
right side of the copier, and shift up the
grip at the rear.
4 Open the upper right door, and slide the
face cover (small) to the rear to remove;
then, detach the face cover (large).
Push in the grip removed in step 2) into
the slot at the front.
COPYRIGHT © 1999 CANON INC.
Work
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
Remarks
Grip
Grip (front)
(rear)
Grip covers
Grip
Grip
Grip cover
Face cover (small)
Grip
Face cover (large)
11-5