Canon GP605 Service Manual page 571

8) Secure the heater unit in place with two
screws.
9) Connect the connector of the heater unit
and the copier's connector.
10) Mount the DC controller PCB and the rear
cover.
11) Set all cassettes.
12) Connect the power plug, and turn on the
power switch.
COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
Heater unit
Figure 11-709
Connector (heater side)
Connect.
Connector (copier side)
Figure 11-710
Screws
11-57