6.
Removing the Multifeeder Pickup
Drive Assembly
Construction
1) Remove the rear cover.
2) Remove the high-voltage transformer
(DC).
3) Loosen the mounting screw on the rear
fixing plate of the registration roller as-
sembly.
4) Remove the four screws [1], and discon-
nect the four connectors [2]; then, detach
the multifeeder pickup drive assembly [3].
COPYRIGHT © 1999 CANON INC.
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
[1]
[2]
Figure 9-D708
[2]
[3]
[1]
[2]
[1]
9-53