Canon GP605 Service Manual page 568

CHAPTER 11 INSTALLATION
3) Remove the copier's rear cover.
4) Disconnect the connector of the DC con-
troller PCB, and free it from the wire
saddle.
Remove the three fixing screws, and de-
tach the DC controller PCB.
5) Press releasing button of the front deck
(R), and slide out it.
Detach the stoppers from both ends, and
take out the deck (R).
Take out the front deck (L) in the same
way.
11-54
COPYRIGHT © 1999 CANON INC.
DC controller PCB
Screw
Screw
Figure 11-703
Stopper
Front deck (R)
Screwdriver
Figure 11-704
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Connectors
Screw
Screwdriver
Stopper