Mounting The Cleaning Blade - Canon GP605 Service Manual

2.

Mounting the Cleaning Blade

1) Butt the cleaning blade [1] against the rear
end of the blade retaining plate [2].
Caution:
When butting the cleaning blade, be sure
there is not gap.
2) Tighten the screws on the blade retaining
plate temporarily in the order indicated.
Caution:
When tightening the screws temporarily,
be sure to hold the blade down against
the end. (See Figure 6-F706.)
3) Tighten the screws on the blade retaining
plate fully in the order indicated.
COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
[1]
[2]
Figure 6-F706
Figure 6-F707
Figure 6-F708
Butted against
the edge.
6-77