Mounting The Fixing Assembly - Canon GP605 Service Manual

C.

Mounting the Fixing Assembly

No.
1 Open the front door.
2 Shift down the fixing/feeding assembly
releasing lever in the direction of the
arrow (left), and unlock the transfer/
separation charging assembly.
Slide out the fixing/feeding unit to the
front.
3 Remove the tag and the separation
assembly releasing member from above
the fixing/feeding assembly.
Caution:
Be sure to remove all traces of glue
(from tape) and foreign matter from
the feeding belt.
4 Remove the tag retaining tape, and
remove the two fixing nip releasing
screws at the front and the rear.
COPYRIGHT © 1999 CANON INC.
Work
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
Remarks
Fixing/feeding assembly releasing lever
Fixing/feeding unit
Separation assembly
Tape
releasing member
Screws
11-9