Assembly (For The Left Deck) - Canon GP605 Service Manual

8. Removing the Lifter Drive

Assembly (for the left deck)

Construction
1) Remove the rear cover.
2) Open the system box assembly.
3) Remove the DC controller assembly.
4) Disconnect the three connectors [1], and
remove the four screws [2]; then, detach
the lifter drive assembly (for the left deck)
[3].
COPYRIGHT © 1999 CANON INC.
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1]
[2]
[1]
Figure 9-D710
[1]
[3] [2]
9-55