Canon GP605 Service Manual page 811

Level 1 Level 2
FUNCTION INSTALL
CCD
LASER
DPC
CST
FIXING
PANEL
PART-
CHK
CLEAR
MISC-R
HRD-
DISK
COPYRIGHT © 1999 CANON INC.
Items under COPIER>FUNCTION
Level 3 Description
TONER-S Use it to supply or stir toner.
CCD-ADJ Use it to execute auto adjustment of shading.
POWER-A Use it to turn on laser A.
POWER-B Use it to turn on laser B.
OFST Use it to adjust the offset for the potential sensor.
C3STMTR Use it to execute auto registration of a paper width basic value for the
cassette 3 (STMTR).
C3-A4R Use it to execute auto registration of a paper width basic value for the
cassette 3 (A4R).
C4-STMTR Use it to execute auto registration of a paper width basic value for the
cassette 4 (STMTR).
C4-A4R Use it to execute auto registration of a paper width basic value for the
cassette 4 (A4R).
MF-A4R Use it to execute auto registration of a paper width basic value for the
manual feed tray (A4R).
MF-A6R Use it to execute auto registration of a paper width basic value for the
manual feed tray (A6R).
MF-A4 Use it to execute auto registration of a paper width basic value for the
manual feed tray (A4).
NIP-CHK Use it to generate a nip width check image output for the fixing roller.
LCD-CHK Use it to check missing dots on the touch panel.
LED-CHK Use it to check the activation of the LEDs on the control panel.
LED-OFF Use it to check the de-activation of the LEDs on the control panel.
KEY-CHK Use it to check the inputs of the keys on the control panel.
TOUCHCHK Use it to adjust the coordinates for the touch panel.
CL Use it to select a clutch that turns on at CL-ON.
CL-ON Use it to check the operation of a clutch.
MTR Use it to check the operation of a motor.
MTR-ON Use it to check the operation of a motor.
SL Use it to select a solenoid that turns on at SL-ON.
SL-ON Use it to check the operation of a solenoid.
ERR Use it to clear error codes.
IP Use it to initialize the RAM on the image processor PCB.
JAM-HIST Use it to clear the jam history.
ERR-HIST Use it to initialize the error code history.
MF-CON Use it to initialize the RAM on the MFC PCB.
SCANLAMP Use it to check the activation of the scanning lamp.
PRE-EXP Use it to check the activation of the pre-exposure LEDs.
SCANDISK Use it to scan the hard disk.
FORMAT Use it to format the hard disk.
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
13-219