Canon GP605 Service Manual page 229

4) Remove the screw [3], and detach the fix-
ing plate [4]; then, disconnect the connec-
tor [5], and detach the transfer/separation
charging assembly [6].
Points to Note When Mounting
• The transfer/separation charging as-
sembly is equipped with a positioning
boss on its front and rear.
When mounting the assembly, be sure
to hook the bosses on the cut-offs in the
stay.
• If the charging assembly cleaner is on
the front side, the home position detect-
ing microswitch can become damaged;
be sure to set the charging cleaner at the
center.
COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
[3]
[4]
Figure 6-B712
Boss
Figure 6-B713
Boss
Figure 6-B714
[6]
[5]
Boss
Boss
6-59