Canon GP605 Service Manual page 489

Caution:
When mounting the front cover, be sure
that the gap between the front cover and
the upper front cover is 3 ±1 mm.
Caution:
If you inadvertently moved the drive belt
for the paper level indicator behind the
front cover when removing the front
cover and cannot find its initial position,
or moved the deck lifter, move down the
deck lifter to its lower limit, and move
the drive belt in the direction of the ar-
row (thereby increasing the while area)
until it stops; then, mount the front
cover. (Operating the deck without
matching the paper level indicator and
the deck lifter position can damage the
drive mechanism of the paper level indi-
cator.)
COPYRIGHT © 1999 CANON INC.
The lifter moves
down to indicate
an increase in the
level of paper
(white area).
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 SIDE PAPER DECK
Front cover
Figure 10-A304b
Deck front cover
Figure 10-A305 (front view)
Upper front cover
Indicator
window
Drive belt
10-23