Canon GP605 Service Manual page 797

Level 1 Level 2
ADJUST LAMP
AE
ADJ-XY
CCD
LASER
DEVELOP
DENS
BLANK
V-CONT
HV-PRI
HV-TR
HV-SP
COPYRIGHT © 1999 CANON INC.
Items under COPIER>ADJUST
Level 3 Range
L-DATA 0 to 255
AE-TBL 1 to 9
ADJ-X 0 to 2970
ADJ-Y 360 to 1360
ADJ-S 0 to 4
GAIN-E 80 to 160
GAIN-O 80 to 160
OFST-E 1 to 254
OFST-O 1 to 254
SH-TRGT 1 to 511
PVE-OFST -300 to 300
LA-DELAY 450 to 550
LA-PWR-A 48 to 432
LA-PWR-B 48 to 432
IP-DELAY 5 to 25
DE-DC 0 to 500
DE-NO-DC 0 to 500
DE-OFST -50 to 50
DENS-ADJ 1 to 9
BLANK-T 0 to 2362
BLANK-B 0 to 2362
EPTOTOFST 0 to 255
VL-OFST -5 to 5
VD-OFST -5 to 5
GRID 400 to 900
TR-N1 -650 to -150 Use it to set the transfer charging output adjustment value
TR-N2 -650 to -150 Use it to set the transfer charging output adjustment value
PRE-TR 0 to 300
SP-N1 0 to 500
SP-N2 0 to 500
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
Description
Use it to adjust the scanning lamp intensity data.
Use it to adjust the text density for AE mode with priority
on speed.
Use it to adjust the image leading edge position.
Use it to adjust the CCD image read start position
(main scanning direction).
Use it to adjust the scanner home position.
Use it to adjust the CCD even-number photocell gain.
Use it to adjust the CCD odd-number photocell gain.
Use it to adjust the CCD even-number photocell offset.
Use it to adjust the CCD odd-number photocell offset.
Use it to set the white level target value for shading
correction.
Use it to adjust the offset from the center of the laser.
Use it to enter the laser delay value for the laser unit.
Use it to set the laser A power adjustment value.
Use it to set the laser B power adjustment value.
Use it to set the laser delay value for the IP PCB.
Use it to set the developing DC output adjustment value
for image exposure.
Use it to set the developing DC output adjustment value
for image exposure.
Use it to adjust the offset for the image bias DC component.
Use it to adjust copy density.
Use it to set the leading edge non-image width.
Use it to set the trailing edge non-image width.
Use it to set the potential sensor offset.
Use it to set the light area potential target value offset.
Use it to set the dark area potential target value offset.
Use it to set the primary charging assembly grid bias
output adjustment value.
(1st side).
(2nd side).
Use it to set the output adjustment value for the
pre-transfer charging assembly.
Use it to set the separation charging output adjustment
value (1st side).
Use it to set the separation charging output adjustment
value (2nd side).
13-205