CHAPTER 7 PICK-UP/FEEDING SYSTEM
E.
Feeding Assembly
1.
Removing the Feeding Belt
1) Slide out the fixing feeding unit from the
copier.
2) Remove the fixing feeding unit front
cover.
3) Disconnect the three connectors [1], and
remove the screw [2]; then, detach the
harness guide [3].
4) Remove the two screws [4], and detach
the fixing feeding unit releasing lever sup-
port plate [5].
7-74
COPYRIGHT © 1999 CANON INC.
[3]
Figure 7-E801
[4]
Figure 7-E802
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
[1]
[5]
[4]