Checking Images/Operations (User Mode) - Canon GP605 Service Manual

I.

Checking Images/Operations (user mode)

No.
1 Push the releasing buttons of the cassettes
3 and 4; then, slide out the cassettes to the
front, and remove the packing material.
2 Set the side plates of the cassettes 3 and 4
against the holes (A4/A3) of the marking
M.
Fit the stops into the holes identified as
follows so that the bottom of the cassette
will not lift.
A: STMT-R
H: LTR-R
Caution:
This step applies only if the user
does not use Inch-configured paper.
3 Connect the power plug to the outlet;
then, turn on the main power switch and
the control panel power switch in
sequence.
Caution:
In the case of a 230V model,
connect the power plug that comes
with the unit to the copier before
making checks.
230V
4 Place copy paper into the cassettes
according to paper size.
5 Attach the size stickers to the paper size
plate of the cassettes.
6 Set each cassette to the copier.
COPYRIGHT © 1999 CANON INC.
Work
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
Remarks
Stops
• Adjust the contrast of the control panel using the
control dial on the screen. Inform the user of how
the dial may be used.
• Check that the Supply Paper indicator has turned
on.
• Press the keys on the keypad and the Clear key to
make sure that the correct copy count is indicated.
Caution:
If you need to change the size of the deck
(R) or (L), see J. "Changing the Size of the
Front Deck (right and left)."
Marking A
Marking H
11-17